sl
Sun Lizard Solar Climate Control System

Overview
How Does It Work?
How Effective Is It?
Benefits
Specifications
Building Suitability
Showcase
Installation
Distribution
FAQs
Downloads
Pricing
Enquiries
Order
 

Sun Lizard Solar Climate Control Systems -- Overview

The Sun Lizard Solar Climate Control Systems is a unique way of heating and cooling your building. It uses solar energy, natural air movements, and heating and cooling dynamics to harmoniously moderate the comfort of your home or building. It can be retrofitted into existing building or installed on buildings under construction.

 

To extract the most value from the Sun Lizard, buildings should be energy efficient, and have reasonable insulation and thermal mass. Suitable buildings will be noticeably warmer in winter and cooler in summer under weather conditions varying from moderately cloudy to full levels of sunlight.

In heating mode the system operates only when there is sufficient sunlight to convert it into heat energy. It uses the building as a thermal heat bank to store the generated heat so the need for additional heating to maintain a comfortable internal temperature during periods of heavy cloud or after sunset is minimised.

In cooling mode, the system works both day and night to extract the hot air out of the building. A mains powered plug pack is included with each system to continue extracting hot air after sunset when solar energy is unavailable. An electrician is not needed if a conveniently located power point is available.

Available Systems

The Sun Lizard Solar Climate Control System is available in two sizes:


Solar Climate Control (Single Collectors with all components)

Single Climate Control
System(Standard)

Suitable for pitched roof with ceiling cavity. Recommended for areas up to 100m2



Solar Climate Control (Dual Collectors with all components)


Dual Climate Control System (Standard)

 

Suitable for pitched roof with ceiling cavity Recommended for areas up to 150m2

If you are able to install your Sun Lizard Climate Control System on a north facing pitched roof with ceiling cavity, then you have all the components that you need in the standard package.

Some additional components may be required to complete your installation if your roof has a different configuration.

Optional Extras

The additional components are bundled in packages to fit different roof types as described below:

Roof types

Single Collector System

Dual Collector System

South roof with ceiling cavity
A North-South frame is needed for each solar heat collector to achieve the optimum solar angle

1NSCC Kit

2NSCC Kit

East and West roof with ceiling cavity
You must have the Dual Collector System for this roof configuration. Install the collectors on either side of the roof apex (one to the east, and one to the west) on frames to achieve the optimum solar angle to the north,.

N/a

I2NSCC Kit

Only East or West roof with ceiling cavity
An East-West or North-South frame isneeded for each solar heat collector to achieve the optimum solar angle

1EWCC Kit

2EWCC Kit

Flat or North roof with no ceiling cavity
A North-South frame is needed for each solar heat collector as well as additional external ducting.

1NSNC Kit

2NSNC Kit

Only East or West roof with no ceiling cavity
An East-West plus a North-South frame are needed for each solar heat collector to achieve the correct angle. Additional external ducting is also needed.

1EWNC Kit

I2EWNC Kit

 

SEE

The Sun Lizard
On
the ABC's
"New Inventors"

LISTEN
To Sun Lizard inventor Colin Gillam explain how the Sun Lizard can work for you


News:
Australia Orders Key Sun Lizard Investor To Leave Country
READ MORE

 

 
Sun Lizard Pty Ltd

Copyright © 2007 Sun Lizard Pty Ltd